Your Partner for Quick & Easy Fittings

Custom
Electrical
Enclosure

Redefine your Electrical assembly with us !

We help youTo save your Efforts

We understand how difficult it is to make drills, cutouts in plastic enclosures. We have economic solutions for Custom Electrical Enclosure. Some features like square and rectangular cuts are not possible without special machines. IF you have reasonable quantity of ordres, we help you to process faster the customization. Our customization in standard enclosures include holes and cutouts in enclosure base, lid and mounting plates. We get input via variety of methods from our customer, and we make 3d models or drawings and we approve the sample prior to bulk production.

IP67 Waterproof

Real IP67 Waterproof Custom Electrical Enclosure with EPDM sponge gasket. Get test reports of all our products from NABL Approved laboratory only.

IK08 Impact Icon for Electrical Enclosure

IK08 Impact Resistance

IK08 Impact resistance for ABS and IK09 for fully Polycarbonate Enclosures. Test reports from NABL Approved laboratory. 3mm thick abs or Polycarbonate body withstands heavy loads.

Idis India box Accessories

Standard Accessories

Complete accessories like Mounting plate, Pole mounting clmap, Cable Gland, Din rail, Lock, Wall mounting clamps, Airvents etc available as standard accessories with our custom electrical enclosure.

Easy Customization in Electrical Enclosures

Customization Available

Easy customization in electrical enclosures. Options to make cutouts, Holes in Enclosure Base, Mounting plate and top lid covers. Optional provision of lock and pole mounted clamps available.

Global Supply

We supply all our products within almost all state of India including, Mizoram, Manipur, J&K etc via transport, courier, india post etc. We Export to different countries via Sea and Air mode in LCL and FCL.

Factory Supply Icon from Idis India

Factory Supply

We dont deal with Dealers and distributors, Most of all our products are shipped from our factory only. This makes it cost effective and ready available stocks. Retail orders are shipped from our online website.

Custom Electrical EnclosureFull Range

We have variety of experiences where we understand the importance of each and every customized holes and cutouts in our Enclosure boxes. In Electrical enclosures, customized holes or cutouts for display, HMI, Meters, switches, toggle, indicator, sockets, etc are very important. Idis India have dedicated team working on these special customization. We get the input from Customer, make a sample cut and approve from the customer prior to go with bulk production. Refer below complete range of Custom Electrical Enclosure with detailed drawings, datasheets and test reports.
100 x 100 x 80 mm IP67 Opaque Custom Electrical Enclosure

100 x 100 x 80 mm Opaque - Custom

SKU 10218
80 Nos Per Carton

Know More
130 x 180 x 100 mm IP67 Transparent Custom Electrical Enclosure

130 x 180 x 100 mm Transparent - Custom

SKU 10223
40 Nos Per Carton

Know More
140 x 190 x 100 mm IP67 Opaque Custom Electrical Enclosure

140 x 190 x 100 mm Opaque - Custom

SKU 10224
40 Nos Per Carton

Know More
140 x 190 x 100 mm Waterproof Transparent custom Electrical Enclosure

140 x 190 x 100 mm Transparent - Custom

SKU 10225
40 Nos Per Carton

Know More
210 x 190 x 100 mm Hinged IP67 Opaque custom Electrical Enclosure

210 x 190 x 100 mm Opaque - Custom

SKU 10234
24 Nos Per Carton

Know More
210 x 190 x 100 mm Hinged IP67 Transparent custom Electrical Enclosure

210 x 190 x 100 mm Transparent - Custom

SKU 10235
24 Nos Per Carton

Know More
290 x 200 x 130 mm Hinged IP67 Opaque custom Electrical Enclosure

290 x 190 x 130 mm Opaque - Custom

SKU 10238
15 Nos Per Carton

Know More
290 x 200 x 130 mm Hinged IP67 Transparent custom Electrical Enclosure

290 x 200 x 130 mm Transparent - Custom

SKU 10239
15 Nos Per Carton

Know More
280 x 280 x 110 mm Hinged IP67 Opaque custom Electrical Enclosure

280 x 280 x 110 mm Opaque - Custom

SKU 10236
10 Nos Per Carton

Know More
280 x 280 x 110 mm Hinged IP67 Transparent custom Electrical Enclosure

280 x 280 x 110 mm Transparent - Custom

SKU 10237
10 Nos Per Carton

Know More
400 x 300 x 150 mm Hinged IP67 Transparent custom Electrical Enclosure

400 x 300 x 150 mm Opaque - Custom

SKU 10240
6 Nos Per Carton

Know More
400 x 300 x 150 mm Hinged IP67 Transparent custom Electrical Enclosure

400 x 300 x 150 mm Transparent - Custom

SKU 10241
6 Nos Per Carton

Know More
400 x 400 x 160 mm Hinged IP67 Opaque custom Electrical Enclosure

400 x 400 x 160 mm Opaque - Custom

SKU 10242
4 Nos Per Carton

Know More
400 x 400 x 160 mm Hinged IP67 Transparent custom Electrical Enclosure

400 x 400 x 160 mm Transparent - Custom

SKU 10243
4 Nos Per Carton

Know More
560 x 380 x 180 mm Hinged Waterproof Opaque custom Electrical Enclosure

560 x 380 x 180 mm Opaque - Custom

SKU 10244
80 Nos Per Carton

Know More
560 x 380 x 180 mm Hinged Waterproof Transparent custom Electrical Enclosure

560 x 380 x 180 mm Transparent - Custom

SKU 10245
80 Nos Per Carton

Know More

Customization inEnclosure Base

Holes and cutouts in the enclosure base needs special tooling and fixtures for accuracy and fast production. Custom electrical enclosure is possible with latest technology and special fixtures . we know customized holes for cable glands, switches, toggle, indicator, sockets, etc are very important. Idis India have dedicated team working on these special customization. We get the input from Customer, make a sample cut and approve from the customer prior to go with bulk production. Refer below examples of the customization in our electrical enclosures bottom or bases.
Custom hole in 130 x 180 x 100 mm Base

130 x 180 x 100 mm

Customized Cable Gland Holes and Cutouts

Custom hole in 140 x 190 x 100 mm Base

140 x 190 x 100 mm

Customized Cable Gland Holes and Cutouts

Custom hole in 210 x 190 x 100 mm Base

210 x 190 x 100 mm

Customized Cable Gland Holes and Cutouts

290 x 200 x 130 mm

Customized Cable Gland Holes and Cutouts

Custom hole in 280 x 280 x 110 mm Base

280 x 280 x 110 mm

Customized Cable Gland Holes and Cutouts

Custom hole in 400 x 300 x 150 mm Base

400 x 300 x 150 mm

Customized Cable Gland Holes and Cutouts

400 x 400 x 160 mm

Customized Cable Gland Holes and Cutouts

Custom hole in 560 x 380 x 180 mm Base

560 x 380 x 180 mm

Customized Cable Gland Holes and Cutouts

Custom ElectricalEnclosure Lid or Cover

Most important factor in any custom electrical enclosure is the cutout on the lid. Because it represnt the aesthetics of the complete unit. In Electrical enclosures, customized holes or cutouts for display, HMI, Meters, switches, toggle, indicator, sockets, etc are very important. Idis India have dedicated team working on these special customization. We get the input from Customer, make a sample cut and approve from the customer prior to go with bulk production. Refer below examples of the custom electrical enclosure lid or covers.
Custom cutout in 400 x 300 x 150 mm Top Cover or Lid

Example 1

400 x 300 x 150 mm

Custom holes in 280 x 280 x 110 mm Top Cover or Lid

Example 2

280 x 280 x 110 mm

Custom holes in 400 x 400 x 160 mm Top Cover or Lid

Example 3

400 x 400 x 160 mm

Customization inMounting Plates

We have variety of experiences where we understand the importance of each and every customized holes and cutouts in our custom electrical enclosure. In mounting plates, customized holes or cutouts for din rail, PCB, Transformet, Relays, Card, etc are very important. Idis India have dedicated team working on these special customization. We get the input from Customer, make a sample cut and approve from the customer prior to go with bulk production. Refer below examples of the customization in our electrical mounting plates.

Example 1

210 x 190 x 100 mm

Custom holes in 290 x 200 x 130 mm Mounting Plate

Example 2

290 x 200 x 130 mm

Custom holes in 280 x 280 x 110 mm Mounting Plate

Example 3

280 x 280 x 110 mm

Custom Electrical EnclosureAddon Parts

There are some cases where all of our above customization do not have optimum solutions, we design and develop additional components to meet customer requirements in our electrical enclosures. This works only when there is bulk Quantity of requiements. We design the concept, make 3d models, make proto type, assemble with proty, design the mold, mold manufacturing and finally production. All in house facility help us to produce the parts very fast. Refer below few examples.
Customized Addon part for Enclosure

Development of Mounting Bracket

When Mounting Plate is not suitable

Customized addon parts for Electrical Enclosure

PCB Mounted on Bracket

Complete assembly will be mounted in Enclosure

Addon parts for customized electrical enclosure

Development of Clamps

When Mounting Plate is not suitable

Addon parts for customized electrical enclosure

Router fixed with Clamp

Waterproof Enclosure for Router with Special Clamps

How we deal withCustom Enclosures

We believe that any kind of customization is not successful until a set of system is established. We have made a very easy, realiable and fast system that avoids more interaction and easy to use for our customized electrical enclosures. Customer can download our predefined autocad drawings which indicate available space for holes and cutouts. Customer can make changes in the same drawing and send us for the review. We make a proto or sample and take approval. Refer below the full detailed system we follow.

1) We ReceiveData From Customers

We receive inputs from our customers via variety of forms, Most of them are via Cad models, Via 2d drawings, Physical parts or via sketches or concepts. For new development, we directly work on any ideas from scratch with our customers.
Customer Input for Cad models

Cad Models

Cad Models received from Customer

2D Drawing input for Electrical Enclosure

2D Drawings

2D Drawings received from Customer

Physical Parts

Physical components received from Customer

Hand Sketch for customized Electrical Enclosure

Sketch and Concepts

hand Sketch received from Customer

2) We Prepare3D Assembly and Drawings

After receiving input from customer, Our team prepares either 3D model or 2D drawings based n part geometry and criticality. We use parametric 3d softwares to maintain the accuracy of the components with respect to mountin gin our electrical enclosures.
Idis Customized Electrical Enclosure Cad Model

3D Cad Models

3D Model created by Idis

2D Drawing for Electrical Enclosure

2D Drawings

2D Drawings created by Idis

2D Drawings

2D Drawings created by Idis

3) We MakeSample Cutting

Once model and drawings are prepared, we dont go in production directly for critical drawings. We make sample cutting in our CNC machines and verify the cutting geometry with the drawings or models.
Custom holes in 400 x 400 x 160 mm electrical Enclosure

Sample Cutouts Example

Sample Cutting by Idis India

Sample Cutouts Example

Sample Cutting by Idis India

4) We Take Approval& Finalize Drawing

After taking measurements and filing reports, We take approval from customers. If everything is satisfied, we assign a unique drawing code for the drawing and save in our database. This drawing is now available for any kind of modification or cutting in future.

Connect With us?

We have dedicated team to assist you more convenient.

For Customization

  • +91 8140080662
  • rajan@idisindia.com

Still have Doubt?

FIll out the form below and we will cantact you as soon as possible






    Shopping Cart
    error: Content is protected !!
    Scroll to Top