Industrial installations demand flexibility. Engineers and panel builders often face a common challenge — they need to mount a standard plastic enclosure onto a DIN rail inside a control panel or switchboard, but they do not want to compromise the enclosure’s IP67 waterproof rating. Until now, this was a difficult trade-off. IDIS India has solved this problem with a purpose-built solution: the I-closure DIN Rail Mounting Bracket for 35mm standard DIN rails.
This is not just a simple plastic clip. It is a carefully engineered mounting accessory made from Nylon 6 with 30% glass fill, tested to IP67 standards, and designed to work seamlessly with existing standard enclosures. The bracket ships as a complete ready-to-use kit, including screws and rubber O-ring washers. Just drill two holes of 4mm as per dimension and fix it in any enclosures. No guesswork. No compromised ingress protection. Just a clean, reliable DIN rail mount that works the first time.
IDIS India has been developing innovative plastic enclosure solutions from Ahmedabad, Gujarat, for industrial, automation, and renewable energy applications. This new product is a direct response to real-world feedback from engineers who need smarter mounting options without sacrificing build quality. If you are looking for custom enclosure design solutions, IDIS India offers end-to-end support from concept to finished product.
Maintaining IP67 Rating While Adding DIN Rail Mounting Capability
Adding any accessory to a sealed enclosure is a risk. Every new screw hole, every gap, every poorly fitted component can allow dust and water to enter. This defeats the purpose of choosing an IP67-rated enclosure in the first place. IDIS India understood this risk from the beginning and designed the I-closure DIN Rail Mounting Bracket with IP67 integrity as the top priority.
The bracket kit includes rubber O-ring washers that sit between the bracket and the enclosure surface at every fastening point. These washers create a watertight seal around each screw. Water cannot travel through the mounting interface. Dust cannot enter through the fixing points. The IP67 rating of your enclosure remains fully intact even after the bracket is installed.
This approach required careful engineering. The bracket geometry, the screw placement, and the O-ring dimensions all had to work together precisely. The I-closure team at IDIS India tested multiple iterations before arriving at the current design. The result is a bracket that adds DIN rail mounting functionality to your enclosure without creating any new ingress path. You get the mounting convenience you need and the waterproof protection your application demands. Both, together, without compromise.
Industrial-Grade Mounting: Applications in Control Panels and Switchboards
The I-closure DIN Rail Mounting Bracket is built for demanding industrial environments. Control panels in manufacturing plants, switchboards in electrical infrastructure, automation cabinets in process industries, and distribution boards in solar and renewable energy installations — these are the places where this bracket performs best.
In these environments, vibration is constant. Temperatures fluctuate. Humidity is often high. Equipment must stay firmly in place and remain protected. The bracket’s Nylon 6 with 30% glass fill material handles all of these conditions comfortably. Glass-filled nylon is significantly stronger and more rigid than standard nylon. It resists deformation under mechanical load. It does not absorb moisture easily. It maintains its shape across a wide temperature range.
The corrosion resistance of the material is another important advantage. In coastal installations, chemical processing environments, or outdoor control panels, metal brackets can corrode over time. The I-closure bracket does not corrode. It stays dimensionally stable and mechanically sound for years of service. IDIS India designed this bracket specifically for engineers who cannot afford mounting failures in the field. Whether you are building a single control panel or equipping an entire facility, this bracket delivers industrial-grade reliability on every installation.
How This Bracket Converts a Standard Enclosure to DIN Rail Mounted
The concept is straightforward. You take a standard plastic enclosure — the kind that is normally wall-mounted using its built-in flanges — and you attach the I-closure DIN Rail Mounting Bracket to its back surface. The bracket has a spring-loaded DIN rail clip built into it. Once the bracket is fastened to the enclosure, the entire assembly snaps onto a 35mm standard DIN rail just like any other rail-mounted device.
The special quick-mount design of the bracket makes installation fast. The spring clip mechanism allows the enclosure to click onto the rail securely with minimal effort. Removing it for maintenance or repositioning is equally simple. There is no need for additional tools once the bracket is attached to the enclosure. The clip engages and releases cleanly, which is exactly what panel builders need when working inside a busy switchboard with limited space.
This conversion capability opens up a wide range of possibilities for system integrators. Enclosures that were previously only suitable for wall or surface mounting can now be used inside standard electrical panels on DIN rails. This means greater design flexibility, better use of panel space, and more organised installations. IDIS India engineered this bracket to be a bridge between two mounting worlds, and it performs that role with precision and reliability.
Complete Kit Breakdown: Brackets, Screws, and Rubber O-Ring Washers
Every I-closure DIN Rail Mounting Bracket is supplied as a complete installation kit. Nothing is left to chance. IDIS India packages everything an installer needs to complete a proper, IP67-compliant DIN rail mounting job right out of the box.
The kit contains multiple brackets, allowing you to equip several enclosures from a single pack. The first image shows how IDIS India supplies these in quantity — twelve brackets laid out together, ready for a larger installation project. Alongside the brackets, the kit includes a bag of self-tapping screws in the correct size and thread specification for the bracket mounting holes. These screws are made from zinc-plated steel, giving them good corrosion resistance for indoor panel environments.
The second bag in the kit contains black rubber O-ring washers. These are the key to maintaining the IP67 rating during installation. Each washer goes onto a screw before it is driven into the enclosure surface. When the screw is tightened, the O-ring compresses and forms a seal around the fastening point. Water and dust cannot pass through. The washers are made from a durable rubber compound that stays flexible over time and does not crack or harden with age.
Together, the brackets, screws, and O-ring washers form a self-contained system. There is nothing extra to source. No special adhesives. No additional sealing compounds. No custom tools. The kit is designed for quick, confident installation by any qualified panel builder or electrician. IDIS India’s attention to this level of detail reflects the I-closure brand’s commitment to making industrial work easier and more reliable at every step.
Material Specification: Why Nylon 6 with 30% Glass Fill Matters
Material choice is one of the most important decisions in industrial component design. The I-closure DIN Rail Mounting Bracket uses Nylon 6 with 30% glass fibre reinforcement, and this choice is deliberate. Standard nylon is a good engineering plastic, but glass-filled nylon is significantly better for structural applications.
The glass fibres increase the tensile strength and flexural modulus of the material considerably. This means the bracket resists bending and deformation under load. When a heavy enclosure filled with electronics is clipped onto a DIN rail, the bracket bears that weight continuously. A weaker material would creep or flex over time. Glass-filled Nylon 6 holds its shape and dimensions reliably, even under sustained mechanical stress.
The material is also inherently resistant to many chemicals, oils, and cleaning agents commonly found in industrial environments. It does not react with most hydraulic fluids or lubricants. It handles temperature extremes better than standard nylon because the glass reinforcement limits thermal expansion. And as already mentioned, it does not corrode — a crucial advantage over metal alternatives in humid or chemically aggressive environments. IDIS India selected this material because it delivers the right balance of strength, durability, chemical resistance, and long-term dimensional stability for demanding real-world applications.
Why I-Closure DIN Rail Mounting Brackets Are the Right Choice for Your Project
The I-closure DIN Rail Mounting Bracket solves a real problem in a clean, thoughtful way. It does not ask you to choose between waterproof protection and DIN rail convenience. It gives you both. It is made from the right material for industrial use. It comes with everything you need for installation. It is tested to IP67. It works with 35mm standard DIN rails, which are the most widely used rail standard in industrial and commercial electrical panels worldwide.
IDIS India manufactures this bracket in Ahmedabad, Gujarat, which means shorter lead times for customers across India. The I-closure brand is trusted by engineers and system integrators in automation, power distribution, renewable energy, and industrial control applications. This new bracket extends that trusted product range into a category that has long needed a proper solution.
If you are specifying components for a control panel build, planning a switchboard installation, or sourcing accessories for a renewable energy project, the I-closure DIN Rail Mounting Bracket deserves a place on your approved parts list. It is durable, reliable, easy to install, and built to industrial standards that match the demands of modern infrastructure projects. For custom enclosure requirements and design support, visit the IDIS India enclosure design page to explore how the I-closure team can support your next project from design through to delivery.
Good mounting hardware is invisible when it works correctly. It holds everything in place, keeps the seals intact, and never demands attention after installation. That is exactly what the I-closure DIN Rail Mounting Bracket is designed to do — and it does it with the quality and engineering precision that IDIS India brings to every product in the I-closure range.
Need Help Choosing the Right Enclosure? Get in Touch!