210x190x100mm PC ABS Electrical Enclosure – Details
Need a safe home for your motor control centres, distribution boards, and automation panels? This 210x190x100mm PC-ABS enclosure offers IP67-rated protection against dust and water in any environment. The grey finish blends well with industrial equipment and panels.
Isometric View
Inside View
Example
Accessories of 210x190x100mm PC ABS Electrical Enclosure
Idis India a reputed, cost effective and reliable partner for complete solution of Waterproof Electrical enclosure and their accessories. Mounting plate helps to fix pcbs and other components. Air vents, Cable Glands, Pole clamp and customized holes and cutouts available. Below is the Accessories of 100x100x80mm Electrical Enclosure by Idis India
Cable Gland
Nylon cable glands suitable for IP65 Ratings from reputed manufacturer. Available size are PG9 and PG13.5 as a standard SKU each pack of 100.
Air Vents
Suitable for highly critical enclosures where chances of heat builtup in IP rated enclosures. IP67 rating will be Void.
Din Rail
Major of electrical components are to be mounted on standard 35mm width Din rails. Available standard cut length as per enclosures.
Downloads of 210x190x100mm PC ABS Electrical Enclosure
Get the most useful resources of the enclosures here. Below are the links to donwload product datasheet, Test reports, autocad DWG 2d Drawings and video link of the product.
Key Features and Benefits
- “The IP67 rating of this product guarantees complete moisture immunity and is dust-proof.
- It is ideal for outdoor installations that are likely to be exposed to rain, dust, and extreme weather conditions.
- Transparency in the enclosure lets technicians visually inspect internal electronic components quickly.
- This means that routine checks on electronic devices can be done much faster due to being able to see important LED lights, LCDs, etc.
- This cabinet has been designed to operate reliably between -20 degrees Celsius and +70 degrees Celsius, which means that it can tolerate the broad range of climates found throughout India.
- No matter if you are in the cold regions of Kashmir are located in the hot desert of Rajasthan, your electronics will remain safe and secure from potentially damaging climate conditions.
- The hinged style of the cabinet door gives easy access for service technicians; and the nylon screws gives additional security for the door closure.
- The cabinet also comes with pre-drilled mounting holes and accessories to make fitting easy for field service technicians.
- Finally, the construction of the cabinet is made of ABS plastic with a grey bottom housing, which meets the IK07 industrial impact rating and is suitable for use in industrial environments where there may be accidental or unintentional impacts, vibration, and mechanical forces applied to the cabinet.
Technical Specifications
- With physical relative dimensions of 210 mm X 190 mm X 100 mm, this enclosure is ideal for mounting some medium-sized junction box and controller assemblies.
- Mounting dimensions for the module contained within the enclosure are 178 mm X 208 mm, making them easy to install on all standard electrical control panel and cabinet systems.
- The enclosure’s dual-material design includes an upper section made of clear polycarbonate which allows you to see into the enclosure while also being durable due to the lower section being made with ABS grade grey.
- The enclosure’s sealing system incorporates no slim sealing with white silicon sponge O-rings to keeps an IP67 rating while red nylon General Fire retardant plastic tensile screws are used to secure the two sections without rusting.
- The enclosure has international certification (CE Marking for compliance with European directives, ROHS certification for Environmentally friendly manufacturing practices) and also conform to IS-13360 Indian standards along with a UV protection from damage when exposed to direct sunlight exposure.
Industries and Applications
- Main Electrical Distribution: Use as LT panels, MCB boxes, or busbar enclosures in factories and large buildings.
- Oil and Gas: Protect junction boxes, pressure transmitters, and valve controllers in refineries and petrol stations.
- Wind and Solar Farms: House inverter controls, battery management systems, and grid protection relays outdoors.
- Defence and Security: Mount rugged communication and electronics in remote outdoor border or military locations.
- Paper and Sugar Mills: Protect motor control centres and PLC panels from steam, dust, and high humidity.
Need more help? Contact us
FIll out the form below and we will cantact you as soon as possible