Electrical Distribution Boards Manufacturer & Exporter Idis India

Distribution Boards by idis India — Redefine your Electrical connections.
Never Before !!

Electrical Distribution Boards With Wiring

We Idis India are manufacturer and exporter of electrical distrubution boards from Ahmedabad Gujarat. Since we are manufacturing Enclosures in house, we can supply the industrial db’s in short time. We have options of MCB, Elcb and RCCB based on customers requirements. Our standard range serves upto 3 plug and sockets maximum. All our products are shipped via our warehouse directly. We dont deal with dealers and distributors to serve end users directly.

IP67 Waterproof

Real IP67 Waterproof Enclosures with EPDM sponge gasket. Get test reports of all our products from NABL Approved laboratory only. Ensure IP67 ratings are for Enclosures only not for Distribution Boards.

IK08 Impact Resistance

IK08 Impact resistance for ABS and IK09 for fully Polycarbonate Enclosures. Test reports from NABL Approved laboratory. 3mm thick abs or Polycarbonate body withstands heavy loads.

Variaty Of Brands

We use components from reliable brands only. We are authorised dealer of Havells. We use havells MCB, ELCB and RCCB for all our standard products. In case of large volumes, we can supply with customer specific brands too.

Factory Supply

We dont deal with Dealers and distributors, Most of all our products are shipped from our factory only. This makes it cost effective and ready available stocks. Retail orders are shipped from our online website.

Global Supply

We supply all our products within almost all state of India including, Mizoram, Manipur, J&K etc via transport, courier, india post etc. We Export to different countries via Sea and Air mode in LCL and FCL.

Ready Stocks

We keep ready stocks of enclosures and accessories. This helps to make dbs fast. We dont keep ready stock of full distribution boards as each customer has different requirements.

Electrical Distribution boards Without MCB

We Idis India are manufacturer and exporter of Electrical Distribution boards, commonly known as industrial DB also. Since we manufacture enclosures in house, and authorized dealer from Havells, we have always stock of the boxes and we can ship the products in tight schedules. We have standard range of ready to use electrical distributiob boards with complete inside wiring and fittings. This Standard range is ready to use with your retail and bulk orders and mostly in stock. IP67 and IK08 test reports available on request for enclosures. Customized orders are possible for bulk orders. Below is the range for without MCB or RCCB.

Industrial DB 1 Phase With 1 Socket 32 Amp

1 Phase DB With 1 Socket 32 Amp

PLUG SOCKET – 32A Makewell or Sibass.
ENCLOSURE – 100X100X80mm.
CABLE – RR or Polycab.
TERMINAL – 10 mm Vital or Elmex.
Packing : 48 Nos per Carton

SKU 10281

Industrial DB 3 Phase With 1 Socket 32 Amp

3 Phase DB With 1 Socket 32 A

PLUG SOCKET – 32A Makewell / Sibass.
ENCLOSURE – 100X100X80mm.
CABLE – RR or Polycab.
TERMINAL – 10 mm Vital / Elmex
Packing : 48 Nos per Carton

SKU 10288

Industrial DB 1 Phase With 2 Socket 32 Amp

1 Phase DB With 2 Socket 32 Amp

PLUG SOCKET – 32A Makewell / Sibass.
ENCLOSURE – 140X190X100mm.
CABLE – RR or Polycab.
TERMINAL – 10 mm Vital / Elmex
Packing : 24 Nos per Carton

SKU 10285

Industrial DB 1 Phase & 3 Phase With 1 Socket 32 Amp

1 Phase & 3 Phase DB With 1 Socket 32A

PLUG SOCKET – 32A Makewell / Sibass.
ENCLOSURE – 140X190X100mm.
CABLE – RR or Polycab.
TERMINAL – 10 mm Vital / Elmex
Packing : 24 Nos per Carton

SKU 10278

Electrical Distribution Board 3 Phase With 2 Socket 32 Amp

3 Phase DB With 2 Socket 32 A

PLUG SOCKET – 32A Makewell / Sibass.
ENCLOSURE – 140X190X100mm.
CABLE – RR or Polycab.
TERMINAL – 10 mm Vital / Elmex
Packing : 24 Nos per Carton

SKU 10290

Electrical Distribution Board 1 Phase With 4 Socket 32 Amp

1 Phase DB With 4 Socket 32 A

PLUG SOCKET – 32A Makewell / Sibass.
ENCLOSURE – 210X190X100mm.
CABLE – RR or Polycab.
TERMINAL – 10 mm Vital / Elmex
Packing : 15 Nos per Carton

SKU 10287

Industrial DB 1 Phase & 3 Phase With 2 Socket 32 Amp

1 Phase & 3Phase DB With 2 Socket 32A

PLUG SOCKET – 32A Makewell / Sibass.
ENCLOSURE – 210X190X100mm.
CABLE – RR or Polycab.
TERMINAL – 10 mm Vital / Elmex
Packing : 15 Nos per Carton

SKU 10284

Electrical Distribution Board 3 Phase With 4 Socket 32 Amp

3 Phase DB With 4 Socket 32 A

PLUG SOCKET – Makewell / Sibass.
ENCLOSURE – 210X190X100mm.
CABLE – RR or Polycab.
TERMINAL – 10 mm Vital / Elmex
Packing : 15 Nos per Carton

SKU 10293

Electrical Distribution boards With MCB

We Idis India are manufacturer and exporter of Electrical Distribution boards, commonly known as industrial DB also. Since we manufacture enclosures in house, and authorized dealer from Havells, we have always stock of the boxes and we can ship the products in tight schedules. We have standard range of ready to use electrical distribution boards with complete inside wiring and fittings. This Standard range is ready to use with your retail and bulk orders and mostly in stock. IP67 and IK08 test reports available on request for enclosures. Customized orders are possible for bulk orders. Below is the range for with MCB.

Electrical Distribution Board 1 Phase With 1 Socket & MCB 32 Amp

1 Phase DB With 1 Socket & MCB 32 A

MCB – Havells 32A 10KA.
PLUG SOCKET – 32A Makewell / Sibass.
ENCLOSURE – 140X190X100mm.
CABLE – RR or Polycab.
TERMINAL – 10 mm Vital / Elmex
Packing : 24 Nos per Carton

SKU 10282

Industrial DB 3 Phase With 1 Socket & MCB 32 Amp

3 Phase DB With 1 Socket & MCB 32 A

MCB – Havells 32A 10KA.
PLUG SOCKET – 32A Makewell / Sibass.
ENCLOSURE – 210X190X100mm.
CABLE – RR or Polycab.
TERMINAL – 10 mm Vital / Elmex
Packing : 15 Nos per Carton

SKU 10289

Industrial DB 1 Phase With 2 Socket & MCB 32 Amp

1 Phase DB With 2 Socket & MCB 32 A

MCB – Havells 32A 10KA.
PLUG SOCKET – 32A Makewell / Sibass.
ENCLOSURE – 210X190X100mm.
CABLE – RR or Polycab.
TERMINAL – 10 mm Vital / Elmex
Packing : 15 Nos per Carton

SKU 10286

Industrial DB 1 Phase & 3 Phase With 1 Socket & 1 MCB 32 Amp

1 Phase & 3 Phase DB With 1 Socket & 1 MCB 32 A

MCB – Havells 32A 10KA.
PLUG SOCKET – 32A Makewell / Sibass.
ENCLOSURE – 290X200X130mm.
CABLE – RR or Polycab.
TERMINAL – 10 mm Vital / Elmex
Packing : 10 Nos per Carton

SKU 10279

Industrial DB 3 Phase With 2 Socket & MCB 32 Amp

3 Phase DB With 2 Socket & MCB 32 A

MCB – Havells 32A 10KA.
PLUG SOCKET – 32A Makewell / Sibass.
ENCLOSURE – 290X200X130mm.
CABLE – RR or Polycab.
TERMINAL – 10 mm Vital / Elmex
Packing : 10 Nos per Carton

SKU 10291

Industrial Distribution Board 3 Phase With 3 Socket & MCB 32 Amp

3 Phase DB With 3 Socket & MCB 32 A

MCB – Havells 32A 10KA.
PLUG SOCKET – 32A Makewell / Sibass.
ENCLOSURE – 280X280X110mm.
CABLE – RR or Polycab.
TERMINAL – 10 mm Vital / Elmex
Packing : 6 Nos per Carton

SKU 10292

Electrical Distribution Board 1 Phase 1 Socket & 3 Phase 2 Socket With MCB 32 Amp

1 Phase 1 Socket & 3 Phase 2 Socket DB With MCB 32 A

MCB – Havells 32A 10KA.
PLUG SOCKET – 32A Makewell / Sibass.
ENCLOSURE – 280X280X110mm.
CABLE – RR or Polycab.
TERMINAL – 10 mm Vital / Elmex
Packing : 6 Nos per Carton

SKU 10280

Industrial DB 1 Phase 2 Socket & 3 Phase 1 Socket With MCB 32 Amp

1 Phase 2 Socket & 3 Phase 1 Socket DB With MCB 32 A

MCB – Havells 32A 10KA.
PLUG SOCKET – 32A Makewell / Sibass.
ENCLOSURE – 280X280X110mm.
CABLE – RR or Polycab.
TERMINAL – 10 mm Vital / Elmex
Packing : 6 Nos per Carton
SKU 10283

SKU 10283

Frequently Asked Questions

What is the difference between a DB with MCB and without MCB?

A DB without MCB connects the socket directly to the incoming supply through terminals — it relies on upstream protection like an existing MCB or RCCB in your main panel. A DB with MCB has a Havells 32A 10KA MCB built inside, which automatically trips and disconnects the socket on overload or short circuit — making it a self-protected standalone unit.

What brands of components do you use inside the distribution boards?

We use Havells MCBs, ELCB, and RCCB — we are an authorised Havells dealer. Plug sockets are Makewell or Sibass brand. Internal wiring uses RR or Polycab ISI-marked cables, and terminal blocks are Vittal or Elmex brand on 35mm DIN rail.

Is the IP67 rating for the complete distribution board?

The IP67 rating applies to the ABS enclosure body only — not to the distribution board as a complete assembled unit. The enclosure is tested and certified at NABL approved laboratory. Once sockets and glands are fitted, the overall protection depends on correct installation and gland sealing.

Can I get a custom configuration of sockets, MCB, and phase?

Yes, custom configurations are possible for bulk orders. We manufacture enclosures in-house and assemble distribution boards at our factory — so we can accommodate different socket counts, phase combinations, MCB ratings, and cable specifications based on your requirements.

What is the minimum order quantity for distribution boards?

Retail orders of any quantity can be placed directly from our website. For bulk pricing slabs, minimum order quantities start from 10K INR. You can check the current pricing structure on our product pages or contact us directly for bulk enquiries.

How quickly can you supply distribution boards?

We keep ready stock of enclosures and all components at our factory. Standard range distribution boards are assembled and dispatched quickly since all materials are in-house. Lead time depends on order quantity — contact us with your requirement for exact dispatch schedules.

Do you supply distribution boards outside India?

Yes, we export to different countries via sea and air in both LCL and FCL modes. Within India we supply to all states including Mizoram, Manipur, J&K and remote areas via transport, courier, and India Post.

Can these distribution boards be installed outdoors?

No, all our distribution boards are built in IP67 rated ABS enclosures suitable for outdoor use. They operate reliably from -20°C to +70°C. Correct gland sealing during installation is important to maintain the IP rating in outdoor conditions. But plug and sockets we used are IP44, hence a seperate Canopy is required for outdoor applications.

What does the 10KA rating on the Havells MCB mean?

10KA is the breaking capacity of the MCB — it means the MCB can safely interrupt a fault current of up to 10,000 Amperes without damage or fire risk. This is the standard rating required for industrial and commercial installations where short circuit fault currents can be very high.

Can I add an RCCB or ELCB to these distribution boards?

Yes, we offer options with MCB, ELCB, and RCCB based on customer requirements for bulk orders only. RCCB protects against earth leakage faults which MCB alone cannot detect — making it essential for wet locations, outdoor sites, and anywhere human contact with equipment is likely. Contact us to discuss the right protection configuration for your application.

Contact us for Doubt?

FIll out the form below and we will cantact you as soon as possible