170x200x100mm PC ABS Enclosure 6 WAY – Details
Built to last in tough conditions, this 100x100x80mm enclosure is made from ABS Grey and carries an IP67 rating. It is ideal for protecting relay boards, timers, motor starters, and control circuits. The solid grey lid keeps your electronics fully protected and hidden.
Isometric View
Inside View
Example
Accessories of 170x200x100mm PC ABS Enclosure 6 WAY
Idis India a reputed, cost effective and reliable partner for complete solution of Waterproof Electrical enclosure and their accessories. Mounting plate helps to fix pcbs and other components. Air vents, Cable Glands, Pole clamp and customized holes and cutouts available. Below is the Accessories of 100x100x80mm Electrical Enclosure by Idis India
Cable Gland
Nylon cable glands suitable for IP65 Ratings from reputed manufacturer. Available size are PG9 and PG13.5 as a standard SKU each pack of 100.
Air Vents
Suitable for highly critical enclosures where chances of heat builtup in IP rated enclosures. IP67 rating will be Void.
Din Rail
Major of electrical components are to be mounted on standard 35mm width Din rails. Available standard cut length as per enclosures.
Downloads of 170x200x100mm PC ABS Enclosure 6 WAY
Measuring 170x200x100mm, this IP67 enclosure is made from strong PC-ABS material. It is designed to safely house motor control centres, distribution boards, and automation panels in harsh environments. A sturdy grey lid makes sure your components stay secure and out of sight.
Key Features and Benefits
- Full Weather Safety – The IP67 water and dust protection rating guarantees that your equipment will be entirely protected against dust, dirt, and water dipping for up to one (1) meter in depth.
- The silicone sponge O-ring gives a watertight seal, preventing moisture and other contaminants from penetrating the enclosure and damaging sensitive electronics inside it.
- Designed For Harsh Environments – This enclosure is perfectly suited for extreme climate range (-20ºC to +70ºC), as it works perfectly in both frozen outside applications as well as hotter areas such as an industrial application.
- UV resistant materials will protect against cracking and fading in prolonged direct sunlight supporting this unoften reoccurring day and night fitting.
- Easy To Install – Comes with multiple mounting options, such as (6) 3/32 Pan Phillip’s style screw mounting in the wall, 35mm DIN rail mountable & wall plug mounting options with (10) 35mm screws.
- Provided pre-drilled mounting holes and (M4) washers allow for quick and secure fitting on any surface.
- Durable Material – The translucent polycarbonate top gives excellent impact resistance (IK07) and will make inspecting any internal components easily.
- The lower section made out of Grey ABS gives superior chemical resistance and will last for years of continued use in an industrial setting.
- Professional Finish – Clean, professional visible in all Light Grey and White finish with Translucent Top. keeps full structural integrity per IS-13360 Inflatable Rating at many pressure levels.
Technical Specifications
- The enclosure has dimensions of 170 mm wide, 200 mm long and 100 mm deep providing ample room for control panels, junction boxes and electronic modules.
- The top cover is constructed from crystal clear polycarbonate (PC) which resists impact and is transparent to allow full view of all internal parts.
- The bottom half is made from high quality light grey ABS plastic that gives excellent mechanical strength and chemical resistance.
- The sealing system consists of a white silicone sponge “O” ring indicating watertight protection, compliant with IP67 requirements.
- All screws are made from stainless steel, preventing rust, even subjected to very corrosive environments i.e, use in marine or chemicals.
- This enclosure is made to comply with the following standards of international quality: CE marking (European compliant) and RoHS (Restriction of Hazardous Substances) Directive; so will function safely for the European market.
- The wall mounting footprint has dimensions of 187 mm x 144.75 mm with mounting holes provided in the most efficient setup to securely attach the box.
- The inside of the enclosure gives 155 mm x 179.75 mm of usable volume with 84.4 mm of depth providing great flexibility to configure internal components.
Industries and Applications
- Main Electrical Distribution: Use as LT panels, MCB boxes, or busbar enclosures in factories and large buildings.
- Oil and Gas: Protect junction boxes, pressure transmitters, and valve controllers in refineries and petrol stations.
- Wind and Solar Farms: House inverter controls, battery management systems, and grid protection relays outdoors.
- Defence and Security: Mount rugged communication and electronics in remote outdoor border or military locations.
- Paper and Sugar Mills: Protect motor control centres and PLC panels from steam, dust, and high humidity.
Need more help? Contact us
FIll out the form below and we will cantact you as soon as possible