1 Phase DB With 2 Socket 32 A – Details
Single phase distribution box with two independent 32A plug sockets — both pre-wired from the same incoming supply inside a 140x190x100mm enclosure. Suitable where two separate single phase loads need to run simultaneously from one protected weatherproof panel.
Closed View
Isometric View
Inside View
Downloads of 1 Phase DB With 2 Socket 32 A
Get the most useful resources of the terminal junction box here. Below are the links to download product datasheet, Test reports, autocad DWG 2d Drawings and video link of the product.
Key Features and Benefits
- Two Sockets Wired in Parallel from Same Supply Terminal: Both sockets share the same L and N terminal input — each socket gets full 32A capacity independently without current sharing between them.
- 140x190x100mm Enclosure Chosen for Two-Socket Layout: Two sockets mounted on the lid need adequate spacing between them — the 190mm length provides enough lid surface for both sockets side by side.
- Four Cable Glands for Clean Entry and Exit: Incoming supply plus two socket tails each get their own gland — three separate sealed entries prevent cable chafing and maintain individual IP67 seals.
- Separate Terminal for Each Socket Feed: Each socket has its own L and N terminal connection — not daisy-chained, so one socket can be isolated at terminal level without affecting the other.
- Longer Internal Wiring Run than Single Socket Version: Two socket tails need routing from terminals to two separate lid positions — Polycab/RR cables are cut and terminated at precise lengths factory-side.
- Heavier DIN Rail Load with More Terminals: Additional terminals for second socket increase DIN rail weight — end stoppers and end plates on both sides prevent any rail shift under vibration.
Technical Specifications
- Enclosure: 140x190x100mm Virgin ABS Grey (RAL 7035) — IP67, IK07, -20°C to +70°C
- Sealing: Silicon Sponge O-Ring with Nylon 6 GF 30% screws | Mounting: 128x178mm
- Sockets: 2x 32A Single Phase Industrial Plug Socket — Makewell / Sibass
- Phase: Single Phase (L, N, E) — 230V AC
- Internal Wiring: Polycab / RR ISI-marked cable, factory pre-wired
- Terminals: 10 Sqmm Vittal / Elmex on 35mm DIN Rail — parallel feed to both sockets
- Standards: CE, RoHS, UL 94-HB, UV Protected
Industries and Applications
- Dual Machine Supply Points: Two separate machines or tools can plug in simultaneously from one panel.
- Construction Command Areas: Two plug points at one location for lighting and power tool use at the same time.
- Agricultural Pump and Lighting: One socket for pump, one socket for site lighting — both from one weatherproof box.
- Solar Plant O&M Dual Supply: Two maintenance tools operating simultaneously from one field panel.
- Workshop Sub-Distribution: Secondary plug panel downstream of main board for two workbench supply points.
Need more help? Contact us
FIll out the form below and we will cantact you as soon as possible